Brocade Network OS Command Reference v4.1.0 - Manual (Page 1011)

Network OS Command Reference 973
53-1003115-01
show qos rcv-queue multicast
2
show qos rcv-queue multicast
Displays the runtime state retrieved from the dataplane reflecting any multicast packet expansion
packet drops resulting from a queue crossing the maximum queue depth.
Synopsis show qos rcv-queue multicast [tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port | all]
Operands tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
all Reports QoS multicast packet expansion receive queueing statistics for all
ASICs within the system.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the runtime state information retrieved from the interface reflecting
any multicast packet expansion packet drops resulting from a queue crossing the maximum queue
depth.
Usage Guidelines The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,
Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.
This command is not supported on Brocade VDX 8770-4 and VDX 8770-8 switches.
For a standalone switch, all ASICs are considered as slot number zero (0).
Examples To display the queueing information:
switch# show qos rcv-queue multicast tengigabitethernet 1/0/2
Dropped Counts
Linecard/Portset TC 0 TC 1 TC 2 TC 3
-----------------------------------------------------------------------------
0/0 0 0 0 0
See Also show qos rcv-queue interface