Brocade Network OS Command Reference v4.1.0 - Manual (Page 195)

Network OS Command Reference 157
53-1003115-01
connector
2
connector
Executes connector mode for the purpose of configuring breakout mode on Quad SFPs (QSFPs).
Synopsis connector [rbridge-id] slot/port
no connector [rbridge-id] slot/port
Operands rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Hardware configuration mode
Descriptions Execute connector mode from hardware configuration mode for the purpose of configuring
breakout mode on QSFPs for switches and line cards.
Usage Guidelines None
Examples
switch(config-hardware)# connector 2/0/1
switch(config-connector-2/0/1)#
See Also sfp breakout, power-off linecard, power-on linecard, show running-config hardware connector