Brocade Network OS Command Reference v4.1.0 - Manual (Page 127)

Network OS Command Reference 89
53-1003115-01
clear counters access-list
2
clear counters access-list
Clears the IP counter statistics on all interfaces on the switch.
Synopsis clear counters access-list {ip IP_ACL | mac ACL_NAME | interface} {port-channel number |
fibrechannel rbridge-id/slot/port | gigabitethernet rbridge-id/slot/port |
tengigabitethernet rbridge-id/slot/port | fortygigabitethernet rbridge-id/slot/port} |
slot-id number | ve vlan_id | vlan vlan_id} {in | out}
Operands ip | mac Specifies the Layer 2 ACL bound to an interface.
IP_ACL Name for the access list. A maximum of 63 characters is allowed.
ACL_NAME Name for the MAC access list. A maximum of 63 characters is allowed.
in | out Specifies the binding direction (ingress or egress). In and out parameters
are used for access-list ip only.
interface Specifies the use of the port-channel, fibrechannel, gigabitethernet or
tengigabitethernet keyword.
port-channel number
Specifies the interface is a port-channel. The number of available channels
range from 1 through 6144.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
ve vlan_id Specifies the virtual Ethernet interface to which the ACL is bound. (Refer to
the Usage Guidelines).
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
vlan vlan_id Specifies the VLAN interface to which the ACL is bound. (Refer to the Usage
Guidelines).