beautypg.com

Logging auditlog class – Brocade Network OS Command Reference v4.1.0 User Manual

Page 467

background image

Network OS Command Reference

429

53-1003115-01

logging auditlog class

2

logging auditlog class

Sets the severity levels for the audit log class.

Synopsis

logging auditlog class class

no logging auditlog class class

Operandsclass

Specifies the class name of the audit log. Valid classes are
CONFIGURATION, FIRMWARE, and SECURITY.

Defaults

CONFIGURATION, FIRMWARE, and SECURITY audit log classes are enabled.

Command Modes

Global configuration mode

Description

Use this command to set the class for the audit log.

Usage Guidelines

This command is supported only on the local switch.

This command is not supported on the standby management module.

The total message storage available is 2048 messages.

Enter no logging auditlog class class to remove the audit logging for the specified class.

Example

To enable the configuration class

switch(config)# logging auditlog class CONFIGURATION

See Also

clear logging auditlog, clear logging raslog