Brocade Network OS Command Reference v4.1.0 - Manual (Page 280)

242 Network OS Command Reference
53-1003115-01
dot1x test timeout
2
dot1x test timeout
Sets the 802.1X readiness test timeout.
Synopsis dot1x test timeout timeout
Operands timeout Specifies the interval value in seconds. Valid values range from 1
through 65535.
Defaults 10 seconds
Command Modes Global configuration mode
Description Use this command to set the 802.1X readiness test timeout.
Usage Guidelines None
Examples To set the test timeout to 30 seconds:
switch(config)# dot1x test timeout 30
See Also dot1x test eapol-capable