Brocade Network OS Command Reference v4.1.0 - Manual (Page 494)

456 Network OS Command Reference
53-1003115-01
match access-list
2
match access-list
Configures the access control list to be used with the class map.
Synopsis match access-list acl_name
Operands acl_name Any valid MAC ACL access list name.
Defaults None
Command Modes Class-map configuration mode
Description Use this command to configure the access control list to be used with the class map for flow-based
QoS.
Usage Guidelines None
Examples Example command:
switch(config-classmap)#match access-list engineeringACL
See Also class-map