Brocade Network OS Command Reference v4.1.0 - Manual (Page 973)

Network OS Command Reference 935
53-1003115-01
show nas statistics
2
show nas statistics
Displays automatic network attached storage (Auto NAS)) statistics.
Synopsis show nas statistics all | server-ip ip_addr mask [vlan VLAN_id | vrf VRF_name] [rbridge-id
rbridge-id]
Operands all Shows all gathered statistics.
server-ip IP address to show Auto NAS statistics for.
ip_addr mask IPv4 address of a specified Auto NAS port in dotted-decimal notation with
a CIDR notation mask.
vlan VLAN_id Specifies which VLAN interface to display the statistics for.
vrf VRF_name Specifies which OSPF VRF interface to display the statistics for.
rbridge-id rbridge-id Specifies which RBridge ID to display the statistics for.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the specified Auto NAS server statistics.
Usage Guidelines This command is supported only on Brocade VDX 8770-4, VDX 8770-8, VDX 6740, and VDX 6740T
switches.
Examples None
See Also auto-qos enable, clear nas statistics, nas auto-qos, nasport server-ip,
show running-config nas server-ip, show system internal nas, show cee maps