Brocade Network OS Command Reference v4.1.0 - Manual (Page 1181)

Network OS Command Reference 1143
53-1003115-01
show running-config threshold-monitor
2
show running-config threshold-monitor
Displays the system’s threshold configuration.
Synopsis show running-config threshold-monitor
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the running system threshold configuration.
Usage Guidelines This command is supported only on the local switch.
Examples
switch# show running-config threshold-monitor
threshold-monitor Cpu poll 30 retry 2 limit 60 actions raslog
threshold-monitor Memory poll 30 retry 2 limit 70 high-limit low-limit 50 actions
none
switch# show running-config threshold-monitor area IFG
Interface Area Value Status Monitoring
Status
--------- ---------------- ------ ------- ------------
fortygigabitethernet 3/8 IFG Violation Error 30 Out of Range Monitoring
fortygigabitethernet 3/9 IFG Violation Error 0 In Range Monitoring
IFG Violation Error 0 In Range Monitoring
See Also show system monitor, system-monitor-mail