Brocade Network OS Command Reference v4.1.0 - Manual (Page 1319)

Network OS Command Reference 1281
53-1003115-01
switchport port-security violation
2
switchport port-security violation
Configures the violation response options for port security on an interface.
Synopsis switchport port-security violation {restrict | shutdown}
Operands restrict Drops packets with unknown source addresses until you remove a sufficient
number of secure MAC addresses to drop below the maximum value.
shutdown Puts the interface into the error-disabled state for a predetermined amount
of time.
Defaults None
Command Modes Interface subtype configuration mode
Description Use this command to configure the violation response options for port security on an interface.
Usage Guidelines None
Examples None
See Also None