Brocade Network OS Command Reference v4.1.0 - Manual (Page 1267)

Network OS Command Reference 1229
53-1003115-01
snmp-server location
2
snmp-server location
Sets the SNMP server location string.
Synopsis snmp-server location string
no snmp-server location string
Operands string Specifies the SNMP server location string. You must enclose the text in
double quotes if the text contains spaces.
Defaults The location string is “End User Premise.”
Command Modes Global configuration mode
Description Use this command to set the SNMP server location string.
Usage Guidelines None
Examples To set the SNMP server location string to “Building 3 Room 214”:
switch(config)# snmp-server location “Building 3 Room 214”
To set the SNMP server location to the default, “End User Premise”:
switch(config)# no snmp-server location
See Also show running-config snmp-server, snmp-server community, snmp-server contact,
snmp-server user, snmp-server v3host