Brocade Network OS Command Reference v4.1.0 - Manual (Page 667)

Network OS Command Reference 629
53-1003115-01
rmon event
2
rmon event
Adds or removes an event in the RMON event table associated to the RMON alarm number.
Synopsis rmon event index [description word | log | owner name | trap word]
no rmon event
Operands index Specifies the RMON event number. Valid values range from 1
through 65535.
description word Specifies a description of the event.
log Generates an RMON log when an event is triggered.
owner name Specifies the owner of the event. The name string must be between 1 and
32 characters in length.
trap word Specifies the SNMP community or string name to identify this trap.
Defaults No events are configured.
Command Modes Global configuration mode
Description Use this command to add or remove an event in the RMON event table that is associated with an
RMON alarm number.
Usage Guidelines Enter no rmon event to remove the event configuration.
Examples To configure an RMON event:
switch(config)# rmon event 2 log description “My Errorstoday” owner gjack
See Also show rmon history