Brocade Network OS Command Reference v4.1.0 - Manual (Page 956)

918 Network OS Command Reference
53-1003115-01
show mac-address-table
2
show mac-address-table
Displays forwarding information for all MAC addresses, for a specific dynamic or static MAC
address, for all dynamic MAC addresses, for all static MAC addresses, for a specific interface, for a
specific VLAN, or for MAC addresses associated with port profiles.
Synopsis show mac-address-table [address mac-addr | aging-time | count | dynamic | interface
{fortygigabitethernet rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port | port-channel number} | linecard interface
{tengigabitethernet rbridge-id/slot/port | gigabitethernet rbridge-id/slot/port} | static |
vlan vlan_id | port-profile [address mac-addr | count | dynamic | static | vlan vlan_id]]
Operands address mac-addr
Displays forwarding information for a 48-bit MAC address. The valid format
is H.H.H (available in Privileged EXEC mode only).
aging-time Displays the aging time.
count Displays the count of forwarding entries.
dynamic Displays the dynamic MAC addresses.
interface Displays the forwarding information of an interface.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
port-channel number
Specifies the port-channel number. Valid values range from 1 through 63.
linecard interface Displays the forwarding information for a line card interface.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet line-card interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.