Brocade Network OS Command Reference v4.1.0 - Manual (Page 690)

652 Network OS Command Reference
53-1003115-01
service password-encryption
2
service password-encryption
Enables or disables password encryption.
Synopsis service password-encryption
no service password-encryption
Operands None
Defaults Default value is service password-encryption.
Command Modes Global configuration mode
Description Use this command to enable encryption for all user account passwords.
Usage Guidelines Enter no service password-encryption to disable password encryption.
Examples To enable password encryption:
switch(config)# service password-encryption
To disable password encryption:
switch(config)# no service password-encryption
See Also show running-config password-attributes