Brocade Network OS Command Reference v4.1.0 - Manual (Page 111)

Network OS Command Reference 73
53-1003115-01
chassis disable
2
chassis disable
Disables all interfaces in the chassis.
Synopsis chassis disable
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to disable all interfaces on the local switch. All interfaces will be taken offline.
Usage Guidelines This command is supported only on the local switch.
Enter chassis disable before making configuration changes or running offline diagnostics.
You must execute the chassis enable command after running offline diagnostics, or the switch will
not boot correctly.
Examples To disable all interfaces on the local switch:
switch# chassis disable
See Also chassis enable