Brocade Network OS Command Reference v4.1.0 - Manual (Page 181)

Network OS Command Reference 143
53-1003115-01
clear udld statistics
2
clear udld statistics
Clears UDLD statistics.
Synopsis clear udld statistics [interface {fortygigabitethernet rbridge-id/slot/port | gigabitethernet
rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port}]
Operands fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface for clearing UDLD statistics.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface clearing UDLD statistics.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface clearing UDLD statistics.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Clears either all unidirectional link detection (UDLD) protocol statistics or clears the statistics on a
specified port.
Usage Guidelines None
Examples To clear UDLD statistics on a specific tengigabitethernet interface:
switch# clear udld statistics interface te 5/0/1
See Also protocol udld, show udld, udld enable