Brocade Network OS Command Reference v4.1.0 - Manual (Page 1375)

Network OS Command Reference 1337
53-1003115-01
user (alias configuration)
2
user (alias configuration)
Launches the user level alias configuration mode.
Synopsis user string
no user string
Operands string Alias name string. The number of characters can be from 1 through 64.
Defaults None
Command Modes Alias configuration mode
Description Use this command to launch the user-level alias configuration mode. This name is only visible to
the user currently logged in to the switch. Use the alias command to configure the alias for the
user name.
Use the no form of his command to remove the user.
Usage Guidelines None
Examples Example of setting a switch alias and a user alias.
switch(config)# alias–config
switch(config-alias-config)# alias redwood engineering
switch(config-alias-config)# user john
switch(config-alias-config-user)# alias johnexpansion smith
switch(config-alias-config-user)# alias userinfo show users
See Also alias, alias-config