Brocade Network OS Command Reference v4.1.0 - Manual (Page 966)

928 Network OS Command Reference
53-1003115-01
show monitor
2
show monitor
Displays the monitoring information for all Port Mirroring sessions.
Synopsis show monitor [session session_number]
Operands session session_number
Specifies a session identification number. Valid values range from 0
through 511 for logical chassis mode, 0 through 23 for standalone mode.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display monitoring information for all Port Mirroring sessions, or for a single
session.
Usage Guidelines None
Examples To display monitoring information for all Port Mirroring sessions:
switch# show monitor
Session :1
Type :Remote source session
Description :Test monitor session
State :Enabled
Source interface :Te 1/0/10 (Up)
Destination interface :Vlan x
Direction :Rx
See Also monitor session