Show storm-control – Brocade Network OS Command Reference v4.1.0 User Manual
Page 1223

Network OS Command Reference
1185
53-1003115-01
show storm-control
2
show storm-control
Displays information for traffic controlled by configured rate limits.
Synopsis
show storm-control
show storm-control broadcast [interface {fortygigabitethernet | gigabitethernet |
tengigabitethernet} rbridge-id/slot/port]
show storm-control multicast [interface {fortygigabitethernet | gigabitethernet |
tengigabitethernet} rbridge-id/slot/port]
show storm-control interface {fortygigabitethernet | gigabitethernet | tengigabitethernet}
rbridge-id/slot/port
show storm-control unknown-unicast [interface {fortygigabitethernet | gigabitethernet |
tengigabitethernet} rbridge-id/slot/port]
Operands
show storm-control
Displays all BUM (Broadcast, Unknown unicast and Multicast)-related
configurations in the system.
show storm-control broadcast
Displays all BUM-related configurations in the system for the broadcast
traffic type.
show storm-control multicast
Displays all BUM-related configurations in the system for the multicast
traffic type.
show storm-control interface type rbridge-id/slot/port
Displays all BUM-related configurations in the system for the specified
interface. You must specify an interface type, followed by the
rbridge-id/slot/port.
show storm-control unknown-unicast
Displays all BUM-related configurations in the system for the
unknown-unicast traffic type.
interface type rbridge-id/slot/port
Specifies an interface type, followed by the rbridge-id/slot/port, for which to
display all BUM-related configurations in the system for the specified traffic
type. Use this parameter to display information on a per-port basis.
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to display BUM storm-control-related configuration for the entire system, for
specified traffic types, for specified interfaces, or for specified traffic types on specified interfaces.
Usage Guidelines
None
Examples
To display storm-control information for broadcast traffic on the 10-gigabit Ethernet interface
102/4/1:
switch# show storm-control broadcast interface tengigabitethernet 102/4/1
Interface
Type
rate (Mbps)
conformed
violated
total
Te102/4/1
broadcast
100,000
12500000000
12500000000
25000000000