Brocade Network OS Command Reference v4.1.0 - Manual (Page 1179)

Network OS Command Reference 1141
53-1003115-01
show running-config tacacs-server
2
show running-config tacacs-server
Displays the TACACS+ server configuration.
Synopsis show running-config tacacs-server [host ipaddr | hostname]
Operands host Identifies the TACACS+ server by host name or IP address.
hostname Specifies the domain name of the TACACS+ server.
ipaddr Specifies the IP address of the TACACS+ server (IPv4 or IPv6).
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the user configuration for the TACACS+ server.
Usage Guidelines None
Examples To display the list of configured TACACS+ servers:
switch# show running-config tacacs-server host fec0:60:69bc:94:211:25ff:fec4:6010
To display a single IPv4 TACACS+ server configuration:
switch# show running-config tacacs-server host 10.24.65.6
To display a single IPv5 TACACS+ server configuration:
switch# show running-config tacacs-server host fec0:60:69bc:94:211:25ff:fec4:6010
See Also radius-server, show running-config radius-server, tacacs-server