Brocade Network OS Command Reference v4.1.0 - Manual (Page 304)

266 Network OS Command Reference
53-1003115-01
external-lsdb-limit (OSPF)
2
external-lsdb-limit (OSPF)
Configures the maximum size of the external link state database (LSDB).
Synopsis external-lsdb-limit value
no external-lsdb-limit
Operands value Maximum size of the external LSDB. The maximum allowed value
is 14913080.
Defaults 14913080
Command Modes OSPF VRF router configuration mode
Description Use this command to configure the maximum size of the external LSDB. If you change the value,
make sure to save the running-config file and reload the software. The change does not take effect
until you reload or reboot the software.
Usage Guidelines Enter no external-lsdb-limit to return to the default setting.
Examples To set the limit of the LSDB to 20000:
switch# configure
switch(config)# rbridge-id 5
switch(config-rbridge-id-5)#router ospf
switch(config-router-ospf-vrf-default-vrf)# external-lsdb-limit 20000
See Also database-overflow-interval (OSPF)