Brocade Network OS Command Reference v4.1.0 - Manual (Page 1142)

1104 Network OS Command Reference
53-1003115-01
show running-config port-profile vlan-profile
2
show running-config port-profile vlan-profile
Displays information about VLAN subprofiles.
Synopsis show running-config port-profile [name] vlan-profile [switchport [access [vlan [vlan_id]] | mode
[access | trunk] | trunk [allowed [vlan [add [vlan_id]| all | except vlan_id | none | remove
[vlan_id]] | native-vlan vlan_id]]]
Operands name Specifies the name of a port-profile. If no name is provided, information
about all port-profiles with a VLAN subprofile applied is displayed.
switchport Specifies the configured switching characteristics of the Layer 2 interfaces.
access Specifies VLAN interfaces for which access is configured for the
VLAN profile mode.
vlan vlan_id
Specifies a VLAN interface configured for access. Refer to the Usage
Guidelines.
mode Specifies the configured mode of the Layer 2 interface.
access Specifies Layer 2 interfaces configured for access mode.
trunk Specifies Layer 2 interfaces configured for trunk mode.
trunk Specifies Layer 2 interfaces configured for trunk mode.
allowed Specifies VLANs that are configured to transmit and receive through the
Layer 2 interface.
vlan add [vlan_id]
Specifies VLANs that are allowed to transmit and receive through the
Layer 2 interface.
vlan all Specifies all VLANs that are allowed to transmit and receive through the
Layer 2 interface.
vlan except vlan_id
Specifies VLANs that excepted from transmitting and receiving through the
Layer 2 interface.
vlan none Specifies VLANs that are allowed to transmit and receive through the
Layer 2 interface.
vlan remove [vlan_id]
Specific VLANs to be removed from those allowed to transmit and receive
through the Layer 2 interface.
native-vlan vlan_id
Specifies native VLANs configured to classify untagged traffic
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about configured VLAN subprofiles.