Brocade Network OS Command Reference v4.1.0 - Manual (Page 129)

Network OS Command Reference 91
53-1003115-01
clear counters access-list (interface)
2
clear counters access-list (interface)
Clears the IP counter statistics on specified interfaces on the switch.
Synopsis clear counters access-list interface {port-channel number | gigabitethernet rbridge-id/slot/port |
tengigabitethernet rbridge-id/slot/port | fortygigabitethernet rbridge-id/slot/port} | ve vlan_id |
vlan vlan_id | port-channel number} {in | out}
Operands interface Specifies the use of the port-channel, gigabitethernet or tengigabitethernet
keyword.
port-channel number
Specifies that the interface is a port-channel. The number of available
channels range from 1 through 6144.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
ve vlan_id Specifies the virtual Ethernet interface to which the ACL is bound. (Refer to
the Usage Guidelines.)
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
vlan vlanID Specifies the VLAN interface to which the ACL is bound.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode