Brocade Network OS Command Reference v4.1.0 - Manual (Page 1154)

1116 Network OS Command Reference
53-1003115-01
show running-config radius-server
2
show running-config radius-server
Displays the local switch configuration for the RADIUS server from the configuration database.
Synopsis show running-config radius-server host {ip-address | hostname}
Operands host Identifies the RADIUS server by host name or IP address.
hostname Specifies the host name of the RADIUS server.
ip-address Specifies the IP address of the RADIUS server. IPv4 and IPv6 are
supported.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display RADIUS server configuration parameters on the local switch.
Usage Guidelines None
Examples
switch# show running-config radius-server host 10.38.37.180
radius-server host 10.38.37.180
protocol pap
key changedsec
timeout 3
See Also radius-server, show running-config tacacs-server, tacacs-server