Brocade Network OS Command Reference v4.1.0 - Manual (Page 757)

Network OS Command Reference 719
53-1003115-01
show debug ip pim
2
show debug ip pim
Displays the current state of the Protocol Independent Multicast (PIM) debug flags.
Synopsis show debug ip pim
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the status of PIM debugging flags on the switch.
Usage Guidelines None
Examples A typical output of this command.
switch# show debug ip pim
PIM debugging status:
--------------------------
add-del-oif : off
bootstrap : off
group : off
join-prune : on
nbr-change : off
packets : off
parent : off
regproc : off
route-change : off
rp : off
source : off
--------------------------
See Also None