Brocade Network OS Command Reference v4.1.0 - Manual (Page 363)

Network OS Command Reference 325
53-1003115-01
inactivity-timer
2
inactivity-timer
Configures the forwarding entry inactivity timer.
Synopsis inactivity-timer num
no inactivity-timer
Operands num The entry inactivity timer interval. Valid values range from 60 through
3600 seconds.
Defaults 180 seconds
Command Modes PIM router configuration mode
Description Use this command to specify the delay interval until a forwarding entry is considered to be active.
At the expiration of this timer, the router deletes a forwarding entry.
Usage Guidelines Enter no inactivity-timer to return to the default setting.
Examples To set the timer to 600 seconds.
switch(conf-pim-router)# inactivity-timer 600
See Also router pim