Brocade Network OS Command Reference v4.1.0 - Manual (Page 204)

166 Network OS Command Reference
53-1003115-01
copy support-interactive
2
copy support-interactive
Copies support data interactively.
Synopsis copy support-interactive
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to copy support data interactively. The command interface prompts you for the
following information:
• Server Name or IP Address (IPv4 only)
• Protocol (FTP or SCP)
• User login name
• Password
• Directory
• Rbridge ID
• Module timeout multiplier
Usage Guidelines This command is functionally equivalent to the copy support command.
Answering Y to the Brocade VCS Fabric support prompt indicates that your switch is in Brocade
VCS Fabric mode. Support data will be copied from all nodes in the fabric.
Examples To upload support data interactively:
switch# copy support-interactive
Save to USB device [y/n]: n
Server Name or IP Address: 10.30.33.131
Protocol (ftp, scp): ftp
User: admin
Password: ********
Directory: /home/admin/support
Enter 'all' for all nodes or specify the rbridgeId(s) of the node(s)[Default:
Local Node]: all
Module timeout multiplier[Range:1 to 5.Default:1]: 2
Rbridge-id 195: Saving support information for chassis:sw0, module:RAS...
(output truncated)
See Also clear support, show copy-support status