Brocade Network OS Command Reference v4.1.0 - Manual (Page 350)

312 Network OS Command Reference
53-1003115-01
ha chassisreboot
2
ha chassisreboot
Performs a reboot of the chassis.
Synopsis ha chassisreboot
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to perform a reboot of the entire chassis. Both the active and the standby
management module reboot. Both management modules retain their original high-availability (HA)
role after the system comes back up. If the power-on self test (POST) is enabled, it is executed
when the system comes back up.
Usage Guidelines This command is supported only on the active management module. This command is not
supported on the standby management module. Both management modules must be in sync for
the HA reboot operation to succeed. Failover and reboots can be disruptive.
Examples To perform an HA reboot:
switch# ha chassisreboot
See Also ha failover, ha enable, reload, show ha