Brocade Network OS Command Reference v4.1.0 - Manual (Page 156)

118 Network OS Command Reference
53-1003115-01
clear ip igmp groups
2
clear ip igmp groups
Clears information related to learned groups in the IGMP module.
Synopsis clear ip igmp groups [A.B.C.D {interface port-channel number | interface vlan vlan_id} |
interface tengigabitethernet rbridge-id/slot/port | interface gigabitethernet rbridge-id/slot/port |
interface port-channel number | interface vlan vlan_id | ve vlan_id [rbridge rbridge-id] |
rbridge rbridge-id]
Operands A.B.C.D Specifies the group address, as a subnet number in dotted decimal format
(for example, 10.0.0.1), as the allowable range of addresses included in
the multicast group.
interface tengigabitethernet rbridge-id/slot/port
Specifies a valid external 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
interface gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
interface port-channel number
Specifies the interface is a port-channel. The number of available channels
range from 1 through 63 for standalone mode, and from 1 through 6144
for Brocade VCS Fabric mode. However, the channel can be assigned any
number from 1 through 6144.
interface vlan vlan_id Specifies which VLAN interface to display the snooping configuration
related information. Refer to “Usage Guidelines” below.
ve vlan_id Specifies groups on the specified virtual Ethernet (VE) interface. (Refer to
the Usage Guidelines.)
rbridge rbridge-id Specifies an RBridge.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to clear the group information in the IGMP database, including entries for
either a specific group on all interfaces or specific groups on specific interfaces.