Brocade Network OS Command Reference v4.1.0 - Manual (Page 1227)

Network OS Command Reference 1189
53-1003115-01
show system internal nas
2
show system internal nas
Displays all NAS server IP addresses in the system.
Synopsis show system internal nas
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the specified Auto NAS server IP addresses.
Usage Guidelines This command is supported only on Brocade VDX 8770-4, VDX 8770-8, VDX 6740, and VDX 6740T
switches.
Examples To display the IP addresses for all active NAS servers:
switch0# show system internal nas
Rbridge 1
-----------
Auto-NAS Enabled
Cos 2
Dscp 10
Traffic Class 5
Server ip 10.192.100.100 mask vlan 100
Server ip 10.192.100.101 mask vrf brown
See Also auto-qos enable, clear nas statistics, nas auto-qos, nasport server-ip, show nas statistics,
show running-config nas server-ip, show system internal nas, show cee maps