Brocade Network OS Command Reference v4.1.0 - Manual (Page 993)

Network OS Command Reference 955
53-1003115-01
show port-security interface
2
show port-security interface
Displays the configuration information related to port-security interfaces.
Synopsis show port-security interface [all | port-channel channel-group-number |
fortygigabitethernet rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port]
Operands all Displays the port-security information for all interfaces.
port-channel channel-group-number
Specifies a LAG port channel-group number to display. Valid values range
from 1 through 63 for standalone mode, and 1 through 6144 for Brocade
VCS Fabric mode.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the configuration information related to port-security interfaces.
Usage Guidelines None
Examples
switch# show port-security interface TenGigabitEthernet 1/1
Port Security :Enabled
Port Status :up / Down (Security Violated)
Violation Mode :Restrict
Violated :Yes/No
Sticky enabled :Yes/No
Maximum MAC Addresses :2
Total MAC Addresses :2
Configured MAC Addresses :5