Brocade Network OS Command Reference v4.1.0 - Manual (Page 1043)

Network OS Command Reference 1005
53-1003115-01
show running-config dpod
2
show running-config dpod
Displays Dynamic Ports on Demand (DPOD) license information.
Synopsis show running-config dpod [rbridge-id/slot/port]
Operands rbridge-id Specifies the RBridge ID.
slot Specifies the slot number.
port Specifies the port number.
Defaults Displays all port reservations on the local switch.
Command Modes Privileged EXEC mode
Description Use this command to display port reservations for a specified port or for all ports on the local
switch.
Usage Guidelines This command has no effect on Brocade VDX 6710 and VDX 8770 switches. These switches do
not support the Dynamic Ports on Demand feature.
In Network OS v3.0.0 release this command is supported only on the local RBridge.
Examples To display port reservations for all ports on the local switch:
switch# show running-config dpod
dpod 10/0/1
reserve
!
dpod 10/0/2
reserve
!
dpod 10/0/3
!
dpod 10/0/4
reserve
!
dpod 10/0/5
!
dpod 10/0/6
reserve
!
(output truncated)
To display port reservations on a switch that does not support the DPOD feature:
switch# show running-config dpod
%No entries found
See Also dpod, show dpod