Show ip ospf routes – Brocade Network OS Command Reference v4.1.0 User Manual
Page 922
884
Network OS Command Reference
53-1003115-01
show ip ospf routes
2
show ip ospf routes
Displays routes.
Synopsis
show ip ospf routes [A.B.C.D] [[vrf vrfname [rbridge-id {rbridge-id | all}]] | rbridge-id {rbridge-id |
all}]
Operands
A.B.C.D
Specifies a destination IP address in dotted decimal format.
vrf vrfname
Specifies the name of the VRF instance. If this option is not used, details
for the default VRF are shown in the output.
rbridge-id rbridge-id
Displays the information for the physical, loopback, and SVI interfaces
specific to the selected RBridge.
all
Displays the information for the physical, loopback, and SVI interfaces of all
nodes in the VCS cluster. There can be multiple loopbacks and SVIs with
the same RBridge ID from different nodes.
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to display routes that OSPF calculated. You can display all routes or you can
display information about a specific route.
Usage Guidelines
None
Examples
To display all OSPF-calculated routes:
switch# show ip ospf routes
OSPF Regular Routes 2:
Destination
Mask
Path_Cost Type2_Cost Path_Type
2.2.2.0
255.255.255.0
1
0
Intra
Adv_Router
Link_State
Dest_Type State
Tag
Flags
2.2.2.1
2.2.2.1
Network
Valid
0
4000*
Paths Out_Port
Next_Hop
Type
State
1
eth 1/2
0.0.0.0
OSPF
00 00
Destination
Mask
Path_Cost Type2_Cost Path_Type
22.22.22.0
255.255.255.0
1
0
Intra
Adv_Router
Link_State
Dest_Type State
Tag
Flags
2.2.2.1
22.22.22.1
Network
Valid
0
4000*
Paths Out_Port
Next_Hop
Type
State
1
eth 2/2
0.0.0.0
OSPF
00 00
See Also
None