Brocade Network OS Command Reference v4.1.0 - Manual (Page 929)

Network OS Command Reference 891
53-1003115-01
show ip pim mcache
2
show ip pim mcache
Displays the multicast cache.
Synopsis show ip pim mcache [ip-address-1 [ip-address-2]] [rbridge-id rbridge-id]
Operands ip-address-1 Group/Source IP address
ip-address-2 Group/Source IP address
rbridge-id rbridge-id Specifies the RBridge ID.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the entries in the multicast cache.
Usage Guidelines None
Examples A typical output for this command.
switch# show ip pim mcache 231.0.0.10
IP Multicast Mcache TableEntry Flags : sm - Sparse Mode, ssm - Source Specific
Multicast
RPT - RPT Bit, SPT - SPT Bit, LSrc - Local Source
LRcv - Local Receiver, RegProbe - Register In Progress
RegSupp - Register Suppression Timer, Reg - Register Complete
L2Reg - L2 Registration, needRte - Route Required for Src/RPTotal entries in
mcache: 2001
(*, 231.0.0.10) RP 22.22.22.22 in Te 18/0/5, Uptime 00:00:56
Sparse Mode, RPT=1 SPT=0 Reg=0 L2Reg=0 RegSupp=0 RegProbe=0 LSrc=0 LRcv=1
upstream neighbor=13.13.13.1
num_oifs = 1
Ve 10, Ve 10(00:00:56/0)
Flags (0x012604a0)
sm=1 ssm=0 needRte=02 (14.14.14.100, 231.0.0.10) in Te 18/0/1, Uptime
00:00:31
Sparse Mode, RPT=0 SPT=0 Reg=0 L2Reg=0 RegSupp=0 RegProbe=0 LSrc=0 LRcv=1
upstream neighbor=48.48.48.5
num_oifs = 1
Ve 10, Ve 10(00:00:31/0)
Flags (0x010600f5)
sm=1 ssm=0 needRte=0Number of matching entries: 2
See Also router pim, show ip pim bsr, show ip pim group, show ip pim neighbor, show ip pim rpf,
show ip pim rp-hash, show ip pim rp-map, show ip pim rp-set, show ip pim-sparse,
show ip pim traffic, show ip pim traffic