Brocade Network OS Command Reference v4.1.0 - Manual (Page 753)

Network OS Command Reference 715
53-1003115-01
show debug dhcp packet buffer
2
show debug dhcp packet buffer
Displays DHCP packets saved in the DHCP packet capture buffer.
Synopsis show debug dhcp packet buffer
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description This command displays DHCP capture buffer content for all VRF IDs.
Usage Guidelines None
Examples The following command displays buffer content for all VRF IDs.
sw0# show debug dhcp packet buffer
Protocol Type : DHCP
Packet Flow : RX
Src Port : 68 (DHCP Client)
Dst Port : 67 (DHCP Server)
Message Type : 1 (DHCP-Discover)
Hardware Type : 1 (Ethernet (10Mb))
Hw Address Len : 6
Hops : 0
Transaction ID : 0
Seconds Elapsed : 0
BootP Flags : 8000
Client IP : 0.0.0.0
Your (client) IP : 0.0.0.0
Next Server IP : 0.0.0.0
Relay Agent IP : 0.0.0.0
Client MAC Add : 00:10:94:00:00:01
Server Host Name : Not Given
Boot File Name : Not Given
*********************************************
Protocol Type : DHCP
Packet Flow : TX
Src Port : 67 (DHCP Server)
Dst Port : 68 (DHCP Client)
Message Type : 2 (DHCP-Offer)
Hardware Type : 1 (Ethernet (10Mb))
Hw Address Len : 6
Hops : 1
Transaction ID : 0
Seconds Elapsed : 0
BootP Flags : 8000
Client IP : 0.0.0.0
Your (client) IP : 10.10.10.30
Next Server IP : 20.20.20.20
Relay Agent IP : 10.10.10.10
Client MAC Add : 00:10:94:00:00:01
Server Host Name : Not Given
Boot File Name : Not Given
*********************************************