Brocade Network OS Command Reference v4.1.0 - Manual (Page 1201)

Network OS Command Reference 1163
53-1003115-01
show slots
2
DISABLED The module is powered on but disabled.
FAULTY The module is faulty because an error was detected.
UNKNOWN The module is inserted but its state cannot be determined.
Usage Guidelines None
Examples To display the modules present in a Brocade VDX 8770-4 chassis:
switch# show slots
Slot Type Description ID Status
----------------------------------------------------------------------
M1 MM Management Module 112 ENABLED
M2 VACANT
S1 VACANT#
S2 SFM Switch Fabric Module 113 ENABLED#
S3 VACANT
L1 LC48X10G 48-port 10GE card 114 ENABLED
L2 LC48X10G 48-port 10GE card 114 ENABLED
L3 VACANT
L4 LC48X1G 48-port 1GE card 131 ENABLED
# = At least one enabled SFM in these slots is required.
NOTE
An “@” following an SFM status line indicates that the status of the optical switch is “OPEN.”
See Also show linecard, show sfm