Brocade Network OS Command Reference v4.1.0 - Manual (Page 278)

240 Network OS Command Reference
53-1003115-01
dot1x reauthMax
2
dot1x reauthMax
Sets the maximum number of times that a port attempts 802.1Xreauthentication.
Synopsis dot1x reauthMax number
no dot1x reauthMax
Operands number Specifies the maximum number of reauthentication attempts before the
port goes to the unauthorized state. Valid values range from 1 through 10.
Defaults The number of times that a port attempts 802.1X authentication is 2.
Command Modes Interface subtype configuration mode
Description Use this command to set the maximum number of times that a port attempts to reauthenticate
before a port changes to the unauthorized state.
Usage Guidelines Enter no dot1x reauthMax to return to the default setting.
Examples To set the maximum number of reauthentication attempts to 5 on a specific 10-gigabit Ethernet
interface port:
switch(config)# interface tengigabitethernet 178/0/9
switch(conf-if-te-178/0/9)# dot1x reauthMax 5
To set the reauthentication maximum to the default value on a specific 40-gigabit Ethernet
interface port:
switch(config)# interface fortygigabitethernet 180/1/9
switch(conf-if-fo-180/1/9)# no dot1x reauthMax
See Also interface, dot1x authentication, dot1x port-control, dot1x quiet-period, dot1x reauthentication,
dot1x timeout re-authperiod, dot1x timeout server-timeout, dot1x timeout supp-timeout,
dot1x timeout tx-period