Brocade Network OS Command Reference v4.1.0 - Manual (Page 1042)

1004 Network OS Command Reference
53-1003115-01
show running-config dot1x
2
show running-config dot1x
Displays the IEEE 802.1x Port Authentication configuration.
Synopsis show running-config dot1x [enable | test timeout]
Operands enable Shows the configured state of globally enabled IEEE 8.02.1x port
authentication.
test timeout Shows the configured timeout value in seconds for the IEEE 802.1x
readiness check.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display IEEE 802.1x Port Authentication information.
Usage Guidelines None
Examples None
See Also dot1x enable, dot1x test timeout