Brocade Network OS Command Reference v4.1.0 - Manual (Page 952)

914 Network OS Command Reference
53-1003115-01
show lldp statistics
2
show lldp statistics
Displays the LLDP statistics on all interfaces or a specified interface.
Synopsis show lldp statistics [interface {tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port}]
Operands interface Specifies an Ethernet interface.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display LLDP statistics on all interfaces or a specified interface.
If you do not specify an interface, Use this command to display the LLDP statistics for all
interfaces.
Usage Guidelines The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710, Brocade
VDX 8770-4, and Brocade VDX 8770-8 switches.
Examples To display LLDP statistics on the specified interface:
switch# show lldp statistics interface tengigabitethernet 5/0/8
LLDP Interface statistics for Te 5/0/8
Frames transmitted: 555
Frames Aged out: 0
Frames Discarded: 0
Frames with Error: 0
Frames Recieved: 554
TLVs discarded: 0
TLVs unrecognized: 0
See Also None