Fabric route mcast – Brocade Network OS Command Reference v4.1.0 User Manual

Page 308

270

Network OS Command Reference

53-1003115-01

fabric route mcast

Sets the multicast priority for the local RBridge in the fabric.

Synopsis

fabric route mcast rbridge-id rbridge-id priority priority

Operands

rbridge-id

Specifies the RBridge ID. This is not valid in standalone mode.

rbridge-id

Specifies the RBridge ID.

priority

Sets a priority. The highest priority overrides the lowest RBridge ID and
becomes the root.

priority

Specifies the priority number of the RBridge.

Defaults

Priority is 1.

Command Modes

Global configuration mode

Description

Use this command to set the multicast priority for the local RBridge in the fabric. The multicast
routing information indicates all ports that are members of the multicast distribution tree: ports
that are able to send and receive multicast frames.

Usage Guidelines

The root of the tree is auto-selected as the switch with the lowest RBridge ID.

This command is not valid in standalone mode.

Examples

To change an RBridge multicast priority:

switch(config)# fabric route mcast rbridge-id 45 priority 5

switch(config)# exit

switch# show running-config fabric route mcast rbridge-id 45 priority

fabric route mcast rbridge-id 45 priority 5