Brocade Network OS Command Reference v4.1.0 - Manual (Page 1046)

1008 Network OS Command Reference
53-1003115-01
show running-config fcsp auth
2
show running-config fcsp auth
Displays the E_Port-to-EX_Port authentication protocol parameters.
Synopsis show running-config [rbridge-id {rbridge-id | all}] fcsp auth
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the E_Port-to-EX_Port authentication protocol parameters such as
auth-type, group, hash type, and policy state.
Usage Guidelines The policy status can be one of the following:. ON, OFF, ACTIVE, or PASSIVE. Refer to the fcsp auth
command for a description of policy states.
Examples To display the protocol and policy:
Standalone mode
switch# show running-config fcsp auth
fcsp auth group 2
fcsp auth hash md5
fcsp auth policy switch off
In VCS mode
To display both protocol and policy (auth-type = all, group = 2, hash = md5, and switch policy = off)
swe52# show running-config rbridge-id 2 fcsp auth
rbridge-id 2
fcspauth auth-type all
fcspauth group 2
fcspauth hash sha1
fcspauth policy switch active
See Also fcsp auth, fcsp auth-secret dhchap, show fcsp auth-secret dh-chap