Brocade Network OS Command Reference v4.1.0 - Manual (Page 1188)

1150 Network OS Command Reference
53-1003115-01
show running-config zoning defined-configuration
2
show running-config zoning defined-configuration
Displays the defined zone configuration.
Synopsis show running-config zoning defined-configuration
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the defined zone configuration for a Brocade VCS Fabric.
The command lists the zones present in each configuration, and the members of each zone.
The defined configuration is the complete set of all zone objects that have been defined in the
network. Multiple zone configurations can be defined, but only one can be enabled at a time.
Usage Guidelines This command is supported only in Brocade VCS Fabric mode. Zoning configuration data are
automatically distributed among all RBridges in the VCS Fabric. Standalone mode is not
supported.
This command can be entered on any RBridge in a Brocade VCS Fabric.
Examples The following example displays the defined zoning configuration:
switch# show running-config zoning defined-configuration
zoning defined-configuration cfg cfg0
member-zone zone_0_1
member-zone zone_0_2
member-zone zone_0_3
member-zone zone_0_4
member-zone zone_same
!
zoning defined-configuration cfg cfg1
member-zone zone_1_1
member-zone zone_1_2
member-zone zone_1_3
member-zone zone_1_4
member-zone zone_same
!
zoning defined-configuration cfg cfg2
member-zone zone_2_1
member-zone zone_2_2
member-zone zone_2_3
member-zone zone_2_4
member-zone zone_same
!
zoning defined-configuration cfg cfg4
member-zone zone2
member-zone zone3
!
zoning defined-configuration zone zone0
member-entry 11:22:33:44:55:66:77:80
member-entry 11:22:33:44:55:66:77:81
member-entry 11:22:33:44:55:66:77:82
member-entry 11:22:33:44:55:66:77:83
member-entry 11:22:33:44:55:66:77:84
!