Brocade Network OS Command Reference v4.1.0 - Manual (Page 386)

348 Network OS Command Reference
53-1003115-01
ip directed-broadcast
2
ip directed-broadcast
Enables IP directed broadcasts on an interface.
Synopsis ip directed-broadcast
no ip directed-broadcast
Operands None
Defaults ip directed broadcast is disabled.
Command Modes Interface subtype configuration mode
Description Use this command to enable IP directed broadcasts for a specific interface. A directed broadcast is
an IP broadcast to all devices within a single directly attached network or subnet.
Usage Guidelines Enter no ip directed-broadcast to disable IP directed broadcasts on a specific interface.
Examples To enable IP directed broadcasts on a specific 10-gigabit Ethernet interface:
switch(config)# interface tengigabitethernet 178/0/9
switch(conf-if-te-178/0/9)# ip directed-broadcast
To disable IP directed broadcasts on a specific 40-gigabit Ethernet interface:
switch(config)# interface fortygigabitethernet 1/3/1
switch(conf-if-fo-1/3/1)# no ip directed-broadcast
See Also interface, interface ve