Brocade Network OS Command Reference v4.1.0 - Manual (Page 1305)

Network OS Command Reference 1267
53-1003115-01
support autoupload enable
2
support autoupload enable
Specifies if support autoupload is enabled or disabled. When set to enabled, the data files are
automatically transferred to the configured remote location.
Synopsis support autoupload enable
no support autoupload enable
Operands None
Defaults Support autoupload is disabled by default.
Command Modes Global configuration mode
Description Whenever a core file, FFDC, trace data file occurs, the data files are automatically transferred to
the configured remote location if the autoupload feature is enabled.
Usage Guidelines Use the no form of this command to disable support autoupload.
Examples To enable autoupload mode:
switch(config)# support autoupload enable
To disable autoupload mode:
switch(config)# no support autoupload enable
See Also show running-config support autoupload-param