Brocade Network OS Command Reference v4.1.0 - Manual (Page 943)

Network OS Command Reference 905
53-1003115-01
show lacp sys-id
2
show lacp sys-id
Displays the Link Aggregation Control Protocol (LACP) system ID and priority information.
Synopsis show lacp sys-id
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the LACP system ID and priority.
Usage Guidelines The system priority and the system Media Access Control (MAC) address make up the system
identification. The first two bytes are the system priority, and the last six bytes are the globally
administered individual MAC addresses associated with the system.
Examples To display the local system ID:
switch# show lacp sys-id
% System 8000,00-05-1e-76-1a-a6
See Also None