Brocade Network OS Command Reference v4.1.0 - Manual (Page 1359)

Network OS Command Reference 1321
53-1003115-01
timeout fnm
2
timeout fnm
For Access Gateway mode, this sets and displays the fabric name monitoring time-out value (TOV)
for Modified Managed Fabric Name Monitoring (M-MFNM) mode.
Synopsis timeout fnm value
Operands value A value from 30 to 120 seconds.
Defaults The default is 120 seconds
Command Modes Access Gateway configuration mode
Description You must be in Access Gateway (AG) configuration mode to use this command. Use this command
to set the time out value (TOV) for M-MFNM queries of the fabric name to detect whether all
N_Ports in a port group are physically connected to the same physical or virtual fabric. M-MFNM is
a Port Grouping mode that prevents connections from the AG VDX switch to multiple SANs.
Usage Guidelines Entering the timeout fnm command without a value displays the current TOV value.
Examples Set the fabric name monitoring TOV value.
sw0(config-rbridge-id-3-ag)# timeout fnm 60
Displays the fabric name monitoring TOV value.
sw0(config-rbridge-id-3-ag)# timeout fnm
See Also None