Brocade Network OS Command Reference v4.1.0 - Manual (Page 1245)

Network OS Command Reference 1207
53-1003115-01
show vlan classifier
2
show vlan classifier
Displays information about a specific VLAN classifier group.
Synopsis show vlan classifier [group number | interface group-number | interface port-channel number |
rule number | interface tengigabitethernet rbridge-id/slot/port |
interface gigabitethernet rbridge-id/slot/port]
Operands group number Specifies the VLAN classifier group number. Valid values range from 1
through 16.
interface group number
Specifies the VLAN classifier interface group number. Valid values range
from 1 through 16.
interface port-channel number
Specifies the VLAN classifier port-channel number. Valid values range
from 1 through 63.
rule number Specifies the VLAN classifier rule number. Valid values range from 1
through 256.
interface tengigabitethernet
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
interface gigabitethernet
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about all configured VLAN classifier groups or a specific
VLAN interface group.
Usage Guidelines If a group ID is not specified, all configured VLAN classifier groups are shown. If a group ID is
specified, a specific configured VLAN classifier group is shown.
The interface gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,
Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.
Examples None
See Also None