Brocade Network OS Command Reference v4.1.0 - Manual (Page 182)

144 Network OS Command Reference
53-1003115-01
clear vrrp statistics
2
clear vrrp statistics
Clears VRRP statistics.
Synopsis clear vrrp statistics
clear vrrp statistics [interface {fortygigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port}] [ve vlan]
clear vrrp statistics [session VRID]
Operands interface Clears statistics for an interface that you specify.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet port interface.
rbridge-id Specifies the RBridge ID.
This parameter is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
ve vlan Specifies the VE vlan number.
session VRID Specifies the virtual group ID on which to clear statistics. Valid values range
from 1 through 128.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to clear VRRP session statistics for all virtual groups, for a specified interface or
for a specified virtual group.
Usage Guidelines This command is for VRRP and VRRP-E. VRRP-E supports only the ve interface type.
To clear all statistics, use the clear vrrp statistics command with no operands.
Examples To clear all VRRP statistics for all virtual groups:
switch# clear vrrp statistics
To clear statistics for a 10-gigabit Ethernet interface that has an rbridge-id/slot/port of 121/0/50: