Brocade Network OS Command Reference v4.1.0 - Manual (Page 168)

130 Network OS Command Reference
53-1003115-01
clear lldp neighbors
2
clear lldp neighbors
Clears the Link Layer Discovery Protocol (LLDP) neighbor information on all or specified interfaces.
Synopsis clear lldp neighbors interface [fortygigabitethernet rbridge-id/slot/port |
tengigabitethernet rbridge-id/slot/port | gigabitethernet rbridge-id/slot/port]
Operands interface Use this parameter followed by the slot or port number to identify the
interface.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to clear the LLDP neighbor information about the devices learned through an
interface.
Usage Guidelines If the interface parameter is not specified, this command clears the LLDP neighbor information
received on all the interfaces.
Examples To clear the LLDP neighbor information for all interfaces:
switch# clear lldp neighbors
See Also show lldp neighbors