Brocade Network OS Command Reference v4.1.0 - Manual (Page 879)

Network OS Command Reference 841
53-1003115-01
show ip bgp peer-group
2
show ip bgp peer-group
Displays peer-group information.
Synopsis show ip bgp peer-group peer-group-name [rbridge-id rbridge-id]
Operands ip-addr IPv4 address of a neighbor in dotted-decimal notation.
peer-group-name Peer-group name configured by the neighbor peer-group-name command.
rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to view peer-group information. Only the parameters that differ from defaults
are listed.
Usage Guidelines None
Examples
switch# show ip bgp peer-group mypeergroup
See Also neighbor