Brocade Network OS Command Reference v4.1.0 - Manual (Page 140)

102 Network OS Command Reference
53-1003115-01
clear counters (MAC)
2
clear counters (MAC)
Clears the MAC counter statistics on all interfaces on the switch.
Synopsis clear counters {all | access-list mac access_list_name | interface {port-channel number} |
fibrechannel {rbridge-id/slot/port} | gigabitethernet {rbridge-id/slot/port} |
tengigabitethernet {rbridge-id/slot/port} | fortygigabitethernet {rbridge-id/slot/port} |
slot-id number | vlan vlan_id}
Operands all Specifies to clear statistics on all interfaces.
access-list mac access_list_name Specifies the name of the MAC access list.
in | out Specifies the binding direction (ingress or egress). In and out parameters
are used for access-list ip only.
interface Specifies the use of the port-channel, fibrechannel, gigabitethernet or
tengigabitethernet keyword.
port-channel number
Specifies the interface is a port-channel. The number of available channels
range from 1 through 63 for standalone mode, and from 1 through 6144
for Brocade VCS Fabric mode. However, the channel can be assigned any
number from 1 through 6144.
fibrechannel rbridge-id/slot/port
Specifies a valid Fibre Channel interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
vlan vlan_id Specifies the VLAN interface to which the ACL is bound. (Refer to the Usage
Guidelines.)